Click on any photo to enlarge
SNK 5-Axis Vertical / Horizontal Machining Center |
||
| Model: CMV-150 | Stock # 10283 | |
| New: Unused, Delivered in June 2008 | Still in crates |
Immediate delivery |
| Work mounting surface | 59" x 59" | 1500mm square |
| Travels X Axis (Longitudinal) | 78.7" | 2000mm |
| Y Axis column traverse | 60.2" | 1530mm |
| Z Axis spindle head vertical | 66.9" | 1700mm |
| A Axis spindle head tilt | +30 / -120 degrees |  |
| C Axis table rotation | +/- 360 degrees (endless) | |
| Feed rates | ||
| - Rapid (X,Y) axes | 15m/min, 600 IMP | |
| - Rapid (Z) axis | 10m/min, 400 ipm | |
| - Feed rate (X,Y,Z) | 0 - 10,000 mm/min, 0 - 400 ipm | |
| - Feed rate (A&C) | 0 - 1500 dpm | |
| - Fine feed | By manual pulse | |
| Equipped With: | ||
| Fanuc series 3li-A5 with AC Servo drives | ||
| (2) 59" x 59" pallets | ||
100 Tool ATC (MAS-BT50) with air blow |
||
| Shower coolant with 1000 lit (instead of std 200 lit) | ||
| Full enclosure with automatic door, chip conveyor | ||
| Automatic measuring & alignment function with inclined face | ||
| Hole and A axis 3 dimensional point measuring; Automatic tool | ||
| Length and diameter laser system, spindle overload function | ||