Click on any photo to enlarge
Cincinnati Cinturn Heavy-Duty NC Lathe |
|||
| Model: Cinturn 15U-80 | Stock #10728 | ||
| New: 1982 | SN: 5305U15-82-006 | ||
| Chuck diameter | 15" | 381mm | |
| Diameter max part clearance | 30.38" | 771mm |  |
| Z Axis travel | 82.5" | 2095mm | |
| X Axis travel | 13" | 330mm | |
| Spindle thru hole (A1-11) | 4.56" | 115.8mm | |
| Spindle speed (2 ranges) | 16 - 1600 rpm | ||
| Spindle motor | 50 hp | ||
| Number of tools ID | 7 | ||
| Number of tools OD | 7 | ||
| Tailstock quill diameter | 5.12" | 130mm |  |
| Tailstock quill taper | #45mm | ||
| Rapid rate | 400 ipm | 9.9m/min | |
| Overall length | 259.5" | 651mm | |
| Overall width | 110.25" | 2800mm | |
| Overall height | 119.5" | 3042mm | |
| Equipped With: | |||
| Acramatic 900 NC Control | |||