Click on any photo to enlarge
60" / 72" G&L CNC Vertical Turret Lathe |
||
| SN: 513-76-81 | New 1981 |
Stock #20049 |
| Diameter of 3-Jaw combination chuck | 60" |  |
| Maximum swing | 72" | |
| Pilot hole in chuck | 7.250" | |
| Max. height under rail | 60" | |
| Travel of rail | 48" | |
| Table speeds in towo ranges | ||
| - high range | 13 to 280 RPM | |
| - Low range | 3 to 70 RPM | |
| Rapid traverse | 250 IPM | |
| Feedrates | .01 - 100 IPM | |
| Max. height under turret face | 68.25" | |
| Turret head | 5 Positions | |
| Equipped With: | ||
| 50 HP SCR Table drive | 460/3/60 Electrics | G&L 800 CNC Control |
| Traon positive lubrication | 5 Position power index turret | Power elevating rail |
| Tooling included | Turret faces arranged to accept Bullard AKU Set tooling | |